OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit can be used to work with X300 Classic G3 (Key Master G3) and DC706 ECU Tool, etc for all Mercedes-Benz FBS4/DAS4 generation with VGS4-0 NAG2 7G-Tronic TCU. It supports solder-free virginizing of used TCM via JTAG mode and personalization (Data transfer) via BENCH or OBD mode, achieving the same effect as TCM clone.
OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit has two kinds of versions.
Full Configuration and Simple Version
Both versions contain the following accessories:
- C4-07-01 Soldering-freeboard
For MB- VGS4-0-NAG2 TCM Read/Write data via JTAG mode
- C4-07-02 Custom positioning board
For accurately positioning TCM hole-drilling position
- W011Connecting Cable
- W020-V1.1Interface Board
- 22mm Custom drill head
For TCM drilling with electric drill
Total price: $126
OBDSTAR C4-07Adapter Kit Full version adds TCM-012 ($15) and Converter V2 ($8) for Bench mode data reading and writing. If you already have these two accessories, you can buy the simple version.
Note:
1. Need to be used with OBDSTAR MP001 multifunctional programmer.
2. All of the above accessories are required to perform the function.
OBDSTAR C4-07Adapter Kit Highlights:
- Custom positioning board for precise drilling and secure drilling access to the control unit;
- Used together with the custom drill head and a handled drill, the TCM can be easily opened with minimal exterior damage;
- High-precision custom board enabling safe, solder-free read/write operations-ensuring reliable data access and operational safety
OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit will be available at the end of August or the beginning of September.
